 LPH-101 series |
| | Model | | Item | LPH-101-124LVG | LPH-101-144LVG | LPH-101-164LVG | | Previous model | LPH-100-124LVG | LPH-100-144LVG | LPH-100-164LVG | | Type of feed | Gravity | Nozzle orifice
( mm) | 1.2 | 1.4 | 1.6 | Atomizing air pressure
(MPa) | 0.1 | 0.13 | Air pressure inside air cap
(MPa) | 0.05 | 0.07 | Air consumption
(L/min) | 200 | 240 | Fluid output
(mL/min) | 80* | 130* | 100 | Pattern width
(mm) | 200* | 220* | 220 | | High atomization |  | | | | Applied air cap model | LV4 | Required air compressor
(kW) | 1.5  2.2 | Mass
(g) | 295 | | Application | Automotive refinishing
(Touch-ups block paint) |
| | Model | | Item | LPH-101-184LVG | LPH-101-124LVS | LPH-101-144LVS | | Previous model | - | LPH-100-144LVS | | Type of feed | Gravity | Suction | Nozzle orifice
(mm) | 1.8 | 1.2 | 1.4 | Atomizing air pressure
(MPa) | 0.13 | 0.1 | Air pressure inside air cap
(MPa) | 0.07 | 0.05 | Air consumption
(L/min) | 240 | 200 | Fluid output
(mL/min) | 120 | 60* | 80* | Pattern width
(mm) | 210 | 170* | 180* | | High atomization | | | | | Applied air cap model | LV4 | Required air compressor
(kW) | 1.5 2.2 | Mass
(g) | 295 | | Applications | Automotive refinishing
(Touch-ups shading) | Automotive refinishing
(Touch-ups Block paint) |
| | Model | | Item | LPH-101-164LVS | LPH-101-082LVP | LPH-101-102LVP | | Previous model | LPH-100-164LVS | - | | Type of feed | Suction | Pressure | Nozzle orifice
(mm) | 1.6 | 0.8 | 1.0 | Atomizing air pressure
(MPa) | 0.1 | 0.18 | Air pressure inside air cap
(MPa) | 0.05 | Air consumption
(L/min) | 200 | 280 | Fluid output
(mL/min) | 95* | 100 | 150 | Pattern width
(mm) | 190* | 230 | 250 | | High atomization | | | | | Applied air cap model | LV4 | LV6 | Required air compressor
(kW) | 1.5 2.2 | Mass
(g) | 295 | | Applications | Automotive refinishing
(Touch-ups Block paint) | Automotive refinishing metal, plastic |
| | Model | | Item | LPH-101-081P | LPH-101-101P | LPH-101-122P | | Previous model | - | LPH-100-122P | | Type of feed | Pressure | Nozzle orifice
(mm) | 0.8 | 1 | 1.2 | Atomizing air pressure
(MPa) | 0.26 | 0.34 | Air pressure inside air cap
(MPa) | 0.07 | Air consumption
(L/min) | 430 | 530 | Fluid output
(mL/min) | 100 | 150 | 350 | Pattern width
(mm) | 170 | 200 | 270 | | High atomization | | | | | Applied air cap model | E1 | G2 | Required air compressor
(kW) | 1.5 2.2 | 2.2 3.7 | Mass
(g) | 295 | | Applications | Metal, woodwork, resin, painting | Metal,Wood,Plastic |
| | Model | | Item | LPH-101-131P | LPH-101-151P | | Previous model | - | | Type of feed | Pressure | Nozzle orifice
(mm) | 1.3 | 1.5 | Atomizing air pressure
(MPa) | 0.26 | Air pressure inside air cap
(MPa) | 0.07 | Air consumption
(L/min) | 430 | Fluid output
(mL/min) | 200 | Pattern width
(mm) | 280 | | High atomization | | | | Applied air cap model | E1 | Required air compressor
(kW) | 1.5 2.2 | Mass
(g) | 295 | | Applications | Metal, woodwork, resin, painting |
| | Spray distance: 200mm | | Paint viscosity: 20sec/NK-2. * marked ones: 12sec/NK-2 | | Fluid nipple G1/4, air nipple G1/4 |
|
|
